User Mode - Andatech AlcoSense NEXUS User Manual

User Mode

Remove the battery cover to access the up and down buttons on the back of the device.
Switch on the
device. Press the
"down" button to
enter User Mode.
To check last
test results:
To check last
calibration date:
To check total
usage count:
To check date
and time:
To set the date:
Enter the pin code using the Enter button to confirm, and the
Up and Down buttons to change the numbers.
The pin code is "0000" by default. Please contact Andatech if
you have lost or forgotten the code after changing it.
C: Number of tests since the last calibration
F: Number of tests with alcohol detected
S: Total number of tests taken on the device