Andatech AkcoSense User Manual

AkcoSense Mini Breathalyser User Manual
Congratulations on purchasing your new AlcoSense Mini.
We hope you enjoy owning your AlcoSense Mini Breath Tester
If you have any questions regarding the unit or want to speak with us further, please call 1300 800
200 during office hours or visit www.andatech.com.au

Disclaimer

1. This product must be used strictly in accordance with the instructions in this manual.
2. This product is intended to provide the user with an indication of alcohol on the breath.
However neither the manufacturer nor the supplier gives any warranty (express or implied)
that the product can give any indication of blood alcohol level.
3. A person's BAC (Blood Alcohol Concentration) can only be accurately measured by the
administration of a blood test. This product only detects alcohol on your breath.
4. In any circumstances the user of this product should not rely on the information provided
thereby as an accurate indication of his or her blood alcohol concentration or of his or her
level of intoxication or of his or her fitness to drive. In particular the user should not take any
action in reliance on such information as the product can provide no more than an indication
of alcohol on the breath.
If the user of this product makes any decision or takes any action based on the use of the product
such decision or such action shall be at the sole risk of the user and neither the manufacturer nor
the supplier assumes any responsibility for such decision or action. In particular, neither the
manufacturer nor the supplier shall be in any way liable if the user of the product asserts that the
product led him or her to believe that he or she was fit to operate a motor vehicle or machinery and
is subsequently found not to be so fit.

Specifications

•
Alcohol concentration sensitivity: 0.00 to 0.40% [change]
•
Response time: 3-5 seconds
•
Sensor: Semiconductor type alcohol sensor
•
Power supply: 2 x 1.5" AA alkaline batteries
•
Weight: 85 grams
•
Dimensions: 104x40x20 mm