Table of Contents
Advertisement
Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
Media and Additional Parts
Description
Ignition Key
Operator's Manual
Engine Operator's Manual
Parts Catalog
Operator Training Materials
1
Raising the Roll Bar
No Parts Required
Procedure
Raise and secure the roll bar before using the product;
refer to
Using the Rollover-Protection System (ROPS)
(page 22)
for detailed instructions and information on
the rollover-protection system.
Description
No parts required
No parts required
No parts required
Qty.
–
–
–
Qty.
1
Spare ignition key
1
Review before operating machine
1
Use to reference engine information
1
Use to reference part numbers
Review before operating machine
2
Checking the Tire Pressure
No Parts Required
Procedure
The tires are overinflated for shipping. Therefore,
release some of the air to reduce the pressure. The
correct air pressure is 124 kPa (18 psi) in the rear tires
and 172 kPa (25 psi) in the caster wheels.
14
Use
Raise the roll bar.
Check the tire pressure.
Check the hydraulic fluid, engine oil,
and coolant levels.
Use
Advertisement
Table of Contents
