Features - Igloohome Push-Pull Mortise Installer/User Manual

Features

PIN / Bluetooth / Fingerprint / RFID Unlock
Master PIN Code
The igloohome Mortise unlocks with a
permanent Master PIN Code.
User PIN Code
The mobile app can generate user
PIN codes, with validity duration from
One-Time, Permanent, Recurring or a
Duration based on Date-time.
Fingerprint
The igloohome Mortise is able to
register up to 100 fingerprints.
Lock
Auto Re-lock
The igloohome Mortise relocks
automatically when door is closed.
User can configure the delay or
deactivate relock if they prefer to.
Do note that function will only work
when Sensor is installed.
Battery
Emergency Jump-Start
If battery power is drained, an
external 9 Volt battery can be used
to provide emergency power. The 2
contact points of the battery must be
aligned with the 2 contact points on
the Mortise.
Bluetooth Master Key
The igloohome Mortise unlocks with
Bluetooth via the app.
Bluetooth Guest Key
Bluetooth keys based on duration can
be generated and shared with guests.
RFID
The igloohome Mortise is able to
register up to 100 key cards.
Manual Re-lock
User can press and hold the "unlock"
icon on the keypad to manually lock
the Mortise.
Low Battery Indicator
When battery power is low (i.e less
than 20%), a low battery indicator will
appear on the keypad, and the red
LED will pulse along with short beeps
when the mortise locks or unlocks.
The battery level will also be updated
on the app during Bluetooth unlock.
If battery power runs out, use the 9V
jumpstart or physical key override.
15