Audio And Led Indications - Igloohome Push-Pull Mortise Installer/User Manual

Audio and LED Indications

Actions
Bluetooth Connection
Successfully Unlocked
Successfully Locked
Incorrect PIN
Invalid RFID
Invalid Fingerprint
Obstruction Alarm
Keypad Disabled
Mode Activated
Keypad Disabled
Mode Deactivated
Keypad Security
Lockout Alarm
Keypad Security
Lockout Deactivated
Low Battery Alert
Fire Alarm
Tamper Alarm
Hard Reset / Unpair
Pairing
34
Indications
Status indicator flashes Blue
Ascending 4 fast tones after unlocked
and flash Green LED 2 times
1 long beep after product is locked
and Green LED for 2 seconds
4 short beeps and flash Red LED 2 times
Descending 4 fast tones
Single invalid attempt - 2 short beeps
3 invalid attempts - Descending 4 fast tones
6 sets of 4 short beeps
Ascending 3 fast tones
Descending 3 fast tones
Low-high siren for 30 /60 / 90 seconds
2 long beeps
When mortise is locked or unlocked:
If battery is below 20% -
2 sets of 2 short beeps with pulsing Red LED
If battery is below 10% -
4 sets of 2 short beeps with pulsing Red LED
Ascending 4 continuous tones
Continuous long beep
Descending 3 slow tones
Ascending 3 fast tones