TP-Link TL-WR843N User Manual page 123

2) Some ISPs require that you register the MAC Address of your adapter, which is connected
to your cable/DSL Modem during installation. If your ISP requires MAC register, log in to
the Router and click the "Network" menu link on the left of your browser, and then click
"MAC Clone" submenu link. On the "MAC Clone" page, if your PC's MAC address is
proper MAC address, click the Clone MAC Address button and your PC's MAC address
will fill in the "WAN MAC Address" field. Or else, type the MAC Address into the "WAN
MAC Address" field. The format for the MAC Address is XX-XX-XX-XX-XX-XX. Then click
the Save button. It will take effect after rebooting.
3. I want to use NetMeeting, what do I need to do?
1) If you start NetMeeting as a sponsor, you don't need to do anything with the Router.
2) If you start as a response, you need to configure Virtual Server or DMZ Host and make
sure the H323 ALG is enabled.
3) How to configure Virtual Server: Log in to the Router, click the "Forwarding" menu on the
left of your browser, and click "Virtual Servers" submenu. On the "Virtual Servers" page,
click Add New.... Then on the "Add or Modify a Virtual Server Entry" page, enter "11130"
for the "Service Port" blank, and your IP address for the "IP Address" blank, taking
192.168.0.198 for an example, remember to Enable and Save.
TL-WR843N 300Mbps Wireless AP/Client Router User Guide
Figure A-3 MAC Clone
Figure A-4 Virtual Servers
- 113 -