Configuration For Client Router Mode - TP-Link TL-WR743ND User Manual

2. After a successfully login, you can click the Quick Setup menu to quickly configure your
Router.
3. Click Next, and then Operation Mode page will appear, as shown in Figure 3-6.

Note:
The Router supports five operation modes for multi-user to access the Internet: Client Router, Router,
Repeater, Bridge with AP and Client. If you are unsure about which one to select, please refer to
Operation Mode Help page. You can configure your device quickly by the following steps in
different modes.
3.2.1

Configuration for Client Router Mode

When you choose Client Router on Operation Mode page in Figure 3-6 , take the following
steps:
1. Click Next, and then WAN Connection Type page will appear as shown in Figure 3-7.
TL-WR743ND
Figure 3-5 Quick Setup
Figure 3-6 Operation Mode
- 14 -
150Mbps Wireless AP/Client Router