TP-Link TL-WR843N User Manual page 53

WDS Mode – WDS1

address frame format.
Key type - This option should be chosen according to the AP's security configuration. It

is recommended that the security type is the same as your AP's security type.
WEP Index - This option should be chosen if the key type is WEP (ASCII) or WEP (HEX).It

indicates the index of the WEP key.
Auth Type - This option should be chosen if the key type is WEP (ASCII) or WEP (HEX).It

indicates the authorization type of the Root AP.
Password - If the AP your Router is going to connect needs password, you need to fill

the password in this blank.
Be sure to click the Save button to save your settings on this page.

Note:
1) The operating distance or range of your wireless connection varies significantly based on the
physical placement of the Router. For best results, place your Router.
Near the center of the area in which your wireless stations will operate.

In an elevated location such as a high shelf.

Away from the potential sources of interference, such as PCs, microwaves, and cordless

phones.
With the Antenna in the upright position.

Away from large metal surfaces.

2) Failure to follow these guidelines can result in significant performance degradation or inability
to wirelessly connect to the Router.
4.7.1.2. Wireless Settings on WISP Client Router Mode
If you select WISP Client Router mode in Figure 4-5, the Wireless Settings page will display as
Figure 4-18.
TL-WR843N 300Mbps Wireless AP/Client Router User Guide
3-address corresponds to frame
- 43 -
format, WDS2 corresponds to 4-