TP-Link TL-WR843N User Manual page 54

SSID - The SSID of the AP your Router is going to connect to as a client. You can also use the

search function to select the SSID to join.
BSSID - The BSSID of the AP your Router is going to connect to as a client. You can also use

the search function to select the BSSID to join.
Survey - Click this button, you can search the AP which runs nearby.

Key type - This option should be chosen according to the AP's security configuration. It is

recommended that the security type is the same as your AP's security type.
WEP Index - This option should be chosen if the key type is WEP (ASCII) or WEP (HEX). It

indicates the index of the WEP key.
Auth type - This option should be chosen if the key type is WEP (ASCII) or WEP (HEX).It

indicates the authorization type of the Root AP.
Password - If the AP your Router is going to connect needs password, you need to fill the

password in this blank.
Local SSID - Enter a value of up to 32 characters. The same Name (SSID) must be assigned

to all wireless devices in your network.
Enable Wireless Router Radio - The wireless radio of the Router can be enabled or disabled

to allow wireless stations access. If enabled, the wireless stations will be able to access the
TL-WR843N 300Mbps Wireless AP/Client Router User Guide
Figure 4-18 Wireless Settings
- 44 -