TP-Link TL-WR843N User Manual page 105


Note:
If you get Address not found error when you access a Web site, it is likely that your DNS servers
are set up improperly. You should contact your ISP to get DNS server addresses.
Address Autoconfiguration Type – RADVD (Router Advertisement Daemon)

andDHCPv6(Dynamic Host Configuration Protocol for IPv6) Server.
DHCPv6 Server
Release Time - the length of time a network user will be allowed to keep connecting to the
•
router with the current DHCPv6 Address. Enter the amount of time (in seconds) that the
DHCPv6 address will be leased. The time range is 1~691200 seconds. The default value
is 86400 seconds.
Site Prefix Configuration Type - The type of IPv6 address prefix.

Delegated - Get the IPv6 address prefix from the ISP automaticlly, and the device will
•
delegate it to the LAN.
Static - Configure the Site Prefix and Site Prefix Length manually. Please contact your ISP
•
to get more infomation before you configure them.
LAN IPv6 Address - Display the LAN IPv6 address created by the device.
2) DHCPv6
Enable IPv6 - Enable or disable the IPv6 feature.

TL-WR843N 300Mbps Wireless AP/Client Router User Guide
- 95 -