TP-Link TL-WR843N User Manual page 51

Wireless Network Name (also called the SSID) - Enter a value of up to 32 characters. The

same name of SSID (Service Set Identification) must be assigned to all wireless devices in
your network. Considering your wireless network security, the default SSID is set to be TP-
LINK_XXXXXXX (XXXXXX indicates the last unique six numbers of each Router's MAC
address). This value is case-sensitive. For example, TEST is NOT the same as test.
Region - Select your region from the pull-down list. This field specifies the region where the

wireless function of the Router can be used. It may be illegal to use the wireless function of
the Router in a region other than one of those specified in this field. If your country or region
is not listed, please contact your local government agency for assistance.
When you select your local region from the pull-down list, click the Save button, then the Note
Dialog appears. Click OK.

Note:
Limited by local law regulations, version for North America does not have region selection option.
TL-WR843N 300Mbps Wireless AP/Client Router User Guide
Figure 4-17 Wireless Settings
Note Dialog
- 41 -