Arp List - TP-Link TL-WR843N User Manual

2. Click Modify or Delete as desired on the Modify column.
To find an existing entry, follow the steps below.
1. Click the Find button as shown in Figure 4-72.
2. Enter the MAC Address or IP Address.
Click the Find button in the page as shown in Figure 4-74.
3.
Click the Enable All button to make all entries enabled.
Click the Delete All button to delete all entries.

4.16.2 ARP List

To manage the computer, you could observe the computers in the LAN by checking the relationship
of MAC address and IP address on the ARP list, and you could configure the items on the ARP list
also. This page displays the ARP List; it shows all the existing IP & MAC Binding entries as shown
in Figure 4-75.
MAC Address - The MAC address of the controlled computer in the LAN.

IP Address - The assigned IP address of the controlled computer in the LAN.

Status - Indicates whether or not the MAC and IP addresses are bound.

Configure - Load or delete an item.

Load - Load the item to the IP & MAC Binding list.

TL-WR843N 300Mbps Wireless AP/Client Router User Guide
Figure 4-75 Find IP & MAC Binding Entry
Figure 4-76 ARP List
- 88 -