MAINTENANCE AND INSPECTION
Daily Inspection
The following daily maintenance and inspection items should be
verified before operating the GM motor.
Except for confirmation of the following third abnormal
sounds, maintenance and inspection must always be
performed when the product is stopped. Inspection during
operation may cause injury or burns. Also, confirmation of
abnormal sounds should be performed in a safe area.
Touching or approaching the product during operation may
cause injury or burns.
1.
No oil leakage (Hydraulic fluid, lubricating oil)
2.
No loose bolts
3.
No abnormal sounds
4.
Casing temperature not abnormally high
(Maximum external casing temperature during continuous
operation = 80°C)
5.
Change interval of lubricating oil.(Refer to 5-4)
Immediately after operation, the casing is hot. To prevent
burns, use a thermometer to measure temperature and do
not touch directly with the hands.
Travel Moter
Page 22
CAUTION
CAUTION
SP001346