Front Attachment Pin Specifications; One-Piece Boom - Doosan DX140R Shop Manual

FRONT ATTACHMENT PIN
SPECIFICATIONS
The table below has a complete listing of dimensional
specifications for all mounting pins used on the front attachment.
NOTE:
Some mounting pins must be drilled and tapped for
lubrication fittings and piping, or may have other
required specifications. Consult DOOSAN After Sales
Service for information on wear tolerances and
replacement limits for mounting pins.

One-Piece Boom

Figure 1
Mounting Pin
A
B
C
D
E
F
G
H
I
J
K
Boom and Arm
Page 6
A C
B K
Diameter, mm (Inches)
71 mm (2.80 in)
71 mm (2.80 in)
71 mm (2.80 in)
71 mm (2.80 in)
71 mm (2.80 in)
71 mm (2.80 in)
65 mm (2.56 in)
65 mm (2.56 in)
65 mm (2.56 in)
65 mm (2.56 in)
65 mm (2.56 in)
E
J I H
Length, mm (Inches)
678 mm (26.69 in)
207 mm (8.15 in)
687 mm (27.05 in)
429 mm (16.89 in)
217 mm (8.54 in)
217 mm (8.54 in)
203 mm (7.99 in)
384 mm (15.12 in)
441 mm (17.36 in)
384 mm (15.12 in)
441 mm (17.36 in)
D F
G
FG009704
SP002378