Cleaning And Inspection - Doosan DX140R Shop Manual

CLEANING AND INSPECTION

(WEAR LIMITS AND
TOLERANCES)
CAUTION
Refer to the "Welding Precautions and Guidelines"
information in "General Maintenance Procedures" section
for general recommendations and specific safety
precautions, before starting any lower travel frame
component rebuilding procedure.
The tables that follow provide factory specified dimensional
limits (as new condition, recommended service and replacement
limit) for lower travel frame components.
Recommended maintenance to renew most listed components
requires welding on additional material and grinding off excess.
Some components must be replaced before the service limit is
exceeded. No maintenance or renewal is possible.
Compare the values in the tables with dimensions and profiles
shown in the adjacent figures.
Track Assembly SP001941
Page 9