Storing A Hyphen Into Memory; Storing A Dialing Pause Into Memory; Storing A Flash Into Memory; Storing Temporary Tone Dialing Into Memory - Cortelco 2740 Instruction Manual

3.1.1

Storing a hyphen into memory

To store a hyphen into a while saving a number into memory, press PAGE. Each press of PAGE will
insert a hyphen. Hyphens are only for ease of reading. They make no difference in dialing.
3.1.2

Storing a dialing pause into memory

To store a pause while saving a number into memory, press HOLD. Each press of HOLD will insert a
1.5 second pause. These will be shown as a "p" in the display.
3.1.3

Storing a flash into memory

To store a flash while saving a number into memory, press FLASH. These can be used to access
features from a PBX. Each press of FLASH will insert a 600 millisecond (or other default time) flash.
These will be shown as an "f" in the display.
3.1.4

Storing temporary tone dialing into memory

To store a "switch to tone" command into memory, press the "*" (TONE) button. All numbers after
this command will be dialed in tone mode. This command is valid only in pulse dial mode.
3.1.5

Storing one of the last five numbers dialed into memory

To store a dialed number into memory, press REDIAL. You may then press the UP or DOWN key to
scroll through the last five numbers dialed. Press the memory location key or the Directory key (#) and
press Yes to save or No to cancel when the desired number is displayed.
3.1.6

Storing a Caller ID number into memory

To store a caller ID number into memory, press CALLS. Then press the UP or DOWN key to select a
Caller ID number to save. Press the memory location key or the Directory key (#) and press Yes to save
or No to cancel when the desired number is displayed.
3.2

To Store a Memory Dial Number

a. Press MENU. The display will read "Phone Setting."
b. Press DOWN ARROW until "Memory Setting" appears in the display
c. Press the soft key under ENTER. The display will read "Select Location"
d. Press the Memory button where the number is to be stored. The display will show the
currently stored number, or indicate "Empty Location."
e. Press the soft key under ENTER to store a new number.
f. Dial the desired telephone number, up to 32 digits.
g. Press the soft key under SAVE.
The 2740 can store up to 5 telephone numbers which can be dialed automatically with the press of a
memory button.
3.3

To Store a Personal Directory Dial Number

a. Press MENU. The display will read "Phone Setting"
b. Press DOWN ARROW until "Memory Setting" appears in the display
Press the soft key under ENTER. The display will read "Select Location"
c.
Press #. The display will read "Empty Location," or indicate that the personal directory is
d.
full.
e. Press the soft key under ENTER to store a new number.
To change a number, press DOWN ARROW repeatedly until the desired entry is displayed,
f.
15 2740 User Manual Version 1.11