Area Codes; Home Area Code; Local Area Codes; Plus 7 - Cortelco 2740 Instruction Manual

b. Press the soft key under DOWN ARROW repeatedly until "Advanced Setting" appears in
the display.
Press the soft key under ENTER.
c.
d. Press the DOWN ARROW repeatedly until "Tone/Pulse" appears in the display. The display
will show the current tone/pulse setting.
Press the soft key under CHANGE repeatedly, to select either TONE or PULSE dialing.
e.
Press MENU to exit.
f.
Note: If the system is set to Pulse Dialing, press the * button to change the dialing mode temporarily to
tone during a call. This can be used to access services which require tone dialing. Dialing mode will
revert to pulse when the call ends.
2.11

Area Codes

The 2740 can accept three sets of Area Codes.
2.11.1

Home Area Code

This is the area code for the area where the 2740 is located. Only one Home Area Code may be
entered. After the Home Area Code is entered, only seven digits will be displayed when a call is
received from within the Home Area Code. Also, only seven digits will be dialed when REDIAL is
pressed.
2.11.2

Local Area Codes

These are area codes that require the area code plus seven digits to be dialed. A "1" is not dialed for
these area codes.
2.11.3

1 Plus 7

These area codes are for calls that require "1" plus the seven digits to be dialed. Up to six 1 Plus 7
area codes may be entered.
2.11.4

To enter area codes

Press MENU. The display will read "Phone Setting"
a.
Press the soft key under ENTER
b.
c. Press DOWN ARROW until "Area Codes" appears in the display
d. Press the soft key under ENTER. The HOME area code setting will be displayed.
e. Press the soft key under CHANGE to change this setting
f. Press DOWN ARROW to view the LOCAL setting
Press the soft key under CHANGE to change this setting
g.
h. Press DOWN ARROW to view the 1 PLUS 7 area code settings.
i. Press the soft key under CHANGE to change this setting
3.

MEMORY SETTINGS

3.1

Memory Features

The 2740 can store up to 45 numbers in its memory. Five numbers can be stored into one-button
Memory locations which are dialed by pressing a memory button. Forty numbers can be stored into
Personal Directory locations, which are dialed by pressing"#" followed by the arrow buttons.
14 2740 User Manual Version 1.11