2.6.1 Configuring Intercom Call Response; Automatic Line Selection; Toll Restriction; 2.8.1 To Set The System's Toll Restriction Access Code - Cortelco 2740 Instruction Manual

2.6.1 Configuring intercom call response:

a. Press MENU. The display will read Phone Setting
b. Press soft key under ENTER.
c. Press the Down Arrow repeatedly until Intercom Prefs appears in the display.
d. Press soft key under ENTER. The display will show the current intercom setting.
Press the soft key under CHANGE repeatedly, until the desired intercom setting is
e.
displayed.
f. Press MENU to exit.
2.7

Automatic Line Selection

The 2740 will automatically select an outside line or the intercom line whenever the handset is lifted or
the SPEAKER button is pressed. To choose which line will be automatically selected:
a. Press MENU. The display will read Phone Setting
Press the soft key under ENTER.
b.
Press the DOWN ARROW repeatedly until Auto Seize appears in the display. The display will
c.
show the current auto seize setting.
d. Press the soft key under CHANGE repeatedly, until the desired setting is displayed. The
choices are L1, L2, L3, L4 or INTCM.
e. Press MENU to exit.
Note: An incoming call that will be selected automatically when the handset is lifted or the SPEAKER
or HEADSET button is pressed, regardless of the automatic line selection choice. To select a non-
ringing line, the desired LINE button must be pressed before lifting the handset.
Note: If the chosen line is in-use, the telephone will automatically select the next available line.
2.8

Toll Restriction

Toll Restriction enables control of outgoing calls. The 2740 accomplishes toll restriction by allowing
entry of number strings which may not be dialed. This is done on a station-by-station basis so different
phones may have differing toll restrictions. This may be used to help prevent unauthorized long
distance calls.
For example, to prevent dialing of "900" numbers, the code 1900 should be entered as a toll restriction.
This would prevent the station from dialing any numbers beginning with 1900.
A "#" character may be entered as a wildcard which matches either 0 or 1. If #900 had been entered in
the example, the station would not dial numbers beginning with either 1900 or 0900.
A toll restriction access code is needed to change or add toll restrictions. This code must be set at
station #01.

2.8.1 To set the system's toll restriction access code:

At Station #01:
a. Press MENU. The display will read "Phone Setting"
b. Press the DOWN ARROW repeatedly until "Toll Restriction" appears in the display.
c. Press the soft key under ENTER. The display will read "Access Code:****."
Press the soft key under CHANGE to store a new access code.
d.
e. Enter a 4 digit number.
f. Press MENU to exit.
11 2740 User Manual Version 1.11