2.8.2 Setting The Restricted Numbers; Allowed Numbers; Toll Restriction Override - Cortelco 2740 Instruction Manual

Note that the previous code is not needed to set a new code. The factory default code is 1234.

2.8.2 Setting the restricted numbers

After toll restrictions are set at a phone, they will be retained even after a power failure.
To set restricted numbers at a station
a. Press MENU. The display will read Phone Setting
b. Press the DOWN ARROW repeatedly until Toll Restriction appears in the display.
c. Press the soft key under ENTER. The display will read Enter Code: [all stations other than
#01]
d. Enter the 4 digit toll restriction access code which was set at Station #01. A confirmation beep
will sound and the display will read Set Restricted #
e. Press the soft key under ENTER. The display will show the currently stored Restriction
#1, or show 1: if no Restriction #1 has been stored.
f. Press the soft key under CHANGE.
g. Dial desired restricted number, up to 6 digits.
Press the soft key under SAVE.
h.
i. Press the DOWN ARROW and repeat steps f-h to store any additional restrictions at this
station.
2.8.3

Allowed numbers

After setting toll restrictions, it is sometimes necessary to enter some exceptions which may be dialed.
For example, if "1" had been entered to completely restrict long distance calls, toll free calls could be
allowed by entering "1800" as an allowed number. The "*" character may be used as a wildcard which
matches any digit. Allowed numbers may contain up to 10 digits.
To set allowed numbers at a station
Press MENU. The display will read "Phone Setting"
a.
b. Press the soft key under ENTER.
c. Press the DOWN ARROW repeatedly until "Toll Restriction" appears in the display.
d. Press the soft key under ENTER. The display will read "Enter Code:"
e. Enter the 4 digit toll restriction access code. A confirmation beep will sound and the display will
read "Set Restricted #"
f. Press the soft key under NEXT. The display will read "Set Allowed #"
g. Press the soft key under ENTER. The display will show the currently stored Allowed #1,
or 1: if there is no Allowed #1 yet stored.
h. Press the soft key under CHANGE
i. Dial desired allowed number, up to 10 digits.
j. Press the soft key under SAVE.
Press the soft key under DOWN ARROW and repeat steps g-j if you wish to store any
k.
additional allowed numbers at this phone.
2.8.4

Toll restriction override

After setting toll restrictions for a station, its toll restriction is automatically ON. This may be
temporarily overridden without affecting the settings stored in the telephone.
12 2740 User Manual Version 1.11