Example Of Timer Setting - Hyundai H-PAC-07C1UR7 Instruction Manual & Warranty Card

Electric air conditioner portable type
Table of Contents

Advertisement

Electric air conditioner
portable type
SET TEMPERATURE ( C)
AUTO
COOL
DRY
HEAT
TEMP
MODE
FAN SPEED
SWING
TIMER ON
ECONOMY
TIMER OFF
RESET LOCK
LED DISPlAY
Fig.17.

10. EXAMPLE OF TIMER SETTING

TIMER ON
Off
S et
Fig. 15
approximately another 2 seconds, the signal "h" will
disappear and the set temperature will re-appear on
the LCD display window.
FAN
HIGH
To set the Auto-on time.
MED
LOW
1. Press the TIMER OFF button. The remote
controller shows TIMER OFF, the last Auto-off
setting time and the signal "h" will be shown on the
LCD display area. Now it is ready to
reset the Auto-off time to START the operation.
2. Push the TIMER OFF button again to set desired.
Auto-off time. Each time you press the button, the
1
time increases in 30 minutes increments, up to 10
hours, then at 1 hour increments up to 24 hours.
2
3. After setting the TIMER OFF ,there will be a
onehalf second delay before the remote controller
transmits the signal to the air conditioner. Then, after
approximately another 2 seconds, the signal "h" will
disappear and the set temperature will re-appear on
the LCD display window.
IMPORTANT!
The effective operation time set by the remote controller for the timer
function is limited to the following settings: 0.5, 1.0, 1.5, 2.0, 2.5, 3.0,
3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5, 10, 11, 12, 13,
14, 15,16,17, 18, 19, 20, 21, 22, 23 and 24.
h
Start
6 hours later
TIMER ON (Auto-on Operation)
The TIMER ON feature is useful when you want
the unit to turn on automatically before say
when you return home. The air conditioner
will automatically start operating at the set
time. To start the air conditioner in 6 hours.
1. Press the TIMER ON button, the last setting
of starting operation time and the signal "h"
will show on the display area.
2. Press the TIMER ON button to display
"6:0h" on the TIMER ON display of the remote
controller.
3. Wait for about 3 seconds and the digital
display area will show the temperature again.
Now this function is activated.
19.
EN

Advertisement

Table of Contents
loading

Table of Contents