Control Setting - Hyundai HY-CLM09KR-001 User Manual

III. Control Setting
1.Control panel operation instructions
1）operation interface：
1. Timer Key 2. The wind speed Key
6.Down Key 7. The sleep button
1: When the machine is powered on for the first time, the buzzer will play buzzing, and then the
machine will get into standby status.
2: Power Key: press the key to turn on and turn off the machine. In the case of power on, press
the key to turn off the machine; in the case of power off, press the key to turn on the machine.
3: Mode Selection Key: In the case of power on, press the key to switch between cooling →
dehumidifying → fan mode.
4: Up Key and Down Key: press the two keys to change the setting temperature or setting time, operate
as follows:
While setting temperature, press up key or down key to select the required temperature (not available
in fan or dehumidifying mode). While setting time, press up key or down key to select the required
time.
5: Wind Speed Selection Key:
1）In cooling and fan mode, press the key to select high,low wind speed operation. But limited
by anti-cold conditions, under certain conditions, it may not run according to the set wind speed.
2）In dehumidifying mode, pressing the key is invalid, and the fan will forcibly choose low wind speed
operation.
6: Timing Key:
In the case of power on, press the key to close timing; in the case of power off, press the key to
open timing.
Press the key, when the timing symbol flashes, press up and down key to select the required timing
value.
Timing values can be set in 1-24 hours and the timing value is adjusted up or down by one hour.
7: Sleep Mode:
In the cooling Mode,Press the UP and Fan Key to turn on the sleep mode,then the unit will work on
Energy-Saving and quiet type.
3.Put the wind Key
8. Mode Selection key 9.Power Key
Licensed by HYUNDAI Corporation Holdings, Korea
Imported/distributed by MARKET MAKER GROUP S.A.
4. Raised Key
28
5. LED Viewing screen