How To Use The Buttons - Hyundai H-PAC-07C1UR7 Instruction Manual & Warranty Card

Electric air conditioner
portable type

9. HOW TO USE THE BUTTONS

SET TEMPERATURE ( C)
AUTO
COOL
DRY
HEAT
TEMP
2
MODE
1
SWING ECONOMY
RESET LOCK
LED DISPlAY
Fig. 13.
SET TEMPERATURE ( C)
AUTO
COOL
DRY
HEAT
TEMP
2
MODE FAN SPEED
1
SWING ECONOMY
RESET LOCK
LED DISPlAY
Fig. 14.
Auto operation
Ensure the unit is plugged in and power is
available. The OPERATION indicator on the
FAN
HIGH display panel of the indoor unit illuminates.
MED
1. Press the MODE button to select Auto.
LOW
2. Press the TEMP button to set the desired
temperature. The temperature can be set
within a range of 17 C(62 F)~ 30 C in 1 C(2 F)
3
increments.
FAN SPEED
3. Press the ON/OFFbutton to start the air
TIMER ON
conditioner.
NOTE:
TIMER OFF
1. In the Auto mode, the air conditioner can logically
choose the mode of Cooling, Fan, Heating and Dehu-
midifying by sensing the difference between the actual
ambient room temperature and the set temperature
on the remote controller.
2. In the Auto mode, you can not switch the fan speed.
It has already been automatically controlled.
3. If the Auto mode is not comfortable for you the
desired mode can be selected manually.
Cooling /Heating/Fan operation
Ensure the unit is plugged in and power is
available.
1. Press the MODE button to select COOL, HEAT, (cool-
ing & heating models only) or FAN mode.
2. Press the TEMP button to set the desired
FAN
HIGH
temperature. The temperature can be set
MED
within a range of 17 C(62 F)~ 30 C in 1 C(2 F)
LOW
increments.
3. Press the FAN SPEED button to select the
fan speed in four steps- Auto, Low, Med,or High.
4
4. Press the ON/OFF button to start the air
3
conditioner.
TIMER ON
NOTE:
In the FAN mode, the setting temperature is not dis-
TIMER OFF
played in the remote controller and you are not able to
control the room temperature either. In this case, only
step 1, 3 and 4 may be performed.
17.
EN