Function Buttons - Hyundai H-PAC-07C1UR7 Instruction Manual & Warranty Card

14.

7. FUNCTION BUTTONS

Fig. 12.
EN
1.TEMP DOWN Button
Push this button to decrease the indoor temperature
setting in 1oC(2 F) increments to 30oC(88 F).
2. TEMP UP Button
Push this button to increase the indoor temperature
setting in 1oC(2 F) increments to 17oC(62 F).
3. MODE Button
Each time the button is pressed, the operation mode is selected in the sequence of the following
AUTO
4. SWING Button(on some models)
Used to stop or start louver movement and set the desired up/down airflow direction.
5. RESET Button
Once the recessed RESET button is pressed, all of the current settings will be cancelled
and the controller will return to the initial settings.
6. ON/OFF Button
Operation starts when this button is pressed and stops when the button is pressed again.
7. FAN SPEED Button
Used to select the fan speed in four steps.
AUTO
COOL
DRY
HEAT
1
MODE
3
SWING
4
5
COOL DRY HEAT
NOTE:
Do not select HEAT mode if the machine you purchased is cooling only
type. Heat mode is not supported by the cooling only appliance.
SET TEMPERATURE ( C)
FAN
HIGH
MED
LOW
TEMP
FAN SPEED
ECONOMY TIMER ON
TIMER OFF
RESET LOCK
LED DISPlAY
FAN
Electric air conditioner
portable type
2
6
7
8
9
10
11
12