4.2 FILE
4 COMMUNICATIONS
4.2.3 PROPERTIES
From the File – Properties option, the program will show a screen including the relay model information, firmware
version, etc., as shown on Figure 4–3:
4
Figure 4–3:
4.2.4 GET INFO FROM RELAY
The File – Get info from relay option enables the user to save the relay settings in a file on the hard disk of the
computer. This file can later be opened offline to review and modify settings, and send them again to the relay after the
modifications.
4.2.5 SEND INFO TO RELAY
The File – Set info to relay option enables to send to the relay a settings file stored on the hard disk of the computer.
4-4
MIGII Digital Protection for Electrical Machines
GEK-113188A