Table of Contents
Advertisement
E.3 SAMPLES OF SETTINGS FOR PARTICULAR MODEMS
E.3SAMPLES OF SETTINGS FOR PARTICULAR MODEMS
In the following sections, we will detail some communications parameters, already tested for the following modems.
Initiation commands for the modem on the PC side:
We will add the following commands to the default configuration:
&AnEnable/disable the ARQ result codes
&HnSets the flux control for the data transfer (TD).
&InSets the software flux control for the data reception
(RD).
&KnEnable/Disable data compression
&MnSets the error control (ARQ) for 1200 bps and higher. Normal mode, error control disabled
&RnConfigures the hardware flux control for data
reception (DR) and transfer request (RTS)
S15Record with bit representation.
S32Record with bit representation.
Initiation commands for the modem on the RELAY side :
The following options must be added to the default configuration:
&AnEnable/disable the ARQ result codes
&DnControl the DTR operations
&HnSets the flux control for the data transfer (TD).
&InSets the software flux control for the data reception
(RD).
&KnEnable/Disable data compression
&MnSets the error control (ARQ) for 1200 bps and higher. Normal mode, error control disabled
&RnConfigures the hardware flux control for data
reception (DR) and transfer request (RTS)
E
S0Sets the number of rings necessary for answering in
automatic answering mode
S15Record with bit representation.
S32Record with bit representation.
E-4
Disable the ARQ result codes
Flux control disabled
Software flux control disabled.
Data compression disabled
Modem ignores RTS.
Disable ARQ/MNP for V.32/V.32bis.
Disable V.34. modulation
ARQ result codes are disabled
About DTR control.
Flux control disabled
Software flux control disabled.
Data compression disabled
Modem ignores RTS.
The modem will answer to the first ring.
Disable ARQ/MNP for V.32/V.32bis.
Disable V.34. modulation
MIGII Digital Protection for Electrical Machines
E.3.1 SPORTSTER FLASH X2 MODEM (HAYES)
APPENDIX E
&A0
&H0
&I0
&K0
&M0
&R1
S15=4
S32=8
&A0
&D0
&H0
&I0
&K0
&M0
&R1
S0=1
S15=4
S32=8
GEK-113188
Advertisement
Table of Contents
