dji Robomaster EP Core User Manual page 47

Firmware Update
The firmware of the gamepad can be updated using the RoboMaster app. When there is a firmware
update available, the RoboMaster app will send a prompt after the gamepad is connected. Follow
the prompts to update the firmware.
Make sure the mobile device is connected to the internet when downloading the firmware.
Internet
Status LED Description
The status LED indicates the working status and current battery level of the gamepad.
Status LED
Blinks green slowly
Blinks red quickly
Solid red
Solid yellow
Solid green
Solid blue
Specifications
Model
Built-in Battery Type
Working Hours*
USB Port
Operation Temperature Range
Charging Temperature Range
Charging Hours*
* The working hours were tested using an Android device, and the charging hours were tested
using a 10 W USB charger at a temperature of 25° C (77° F). Both the working hours and the
charging hours were tested in a lab environment, and should be taken as a reference only.
Description
The gamepad is charging
The gamepad's battery level is 0%
The gamepad's battery level is between 1% to 29%
The gamepad's battery level is between 30% to 69%
The gamepad's battery level is between 70% to 100%
The gamepad is initializing
GD0MA
3.6 V, 2600 mAH, 1S1P
Approx. 2 hours
500 mA / 5 V
-10° to 45° C (14° to 113° F)
0° to 45° C (32° to 113° F)
Approx. 2 hours
ROBOMASTER EP Core User Manual
©
2020 DJI All Rights Reserved.
47