Camera; Speaker - dji Robomaster EP Core User Manual

ROBOMASTER EP Core User Manual
10. Connect Button
The connect button functions differently when connecting via Wi-Fi or router.
Connection to Wi-Fi: Once the Wi-Fi password is forgotten, press and hold this button for five
seconds to reset the Wi-Fi password.
Connection to Router: When scanning the QR code with the robot to join a network, press this button
first.
DO NOT pull on the antenna.
If the intelligent controller antenna is damaged, the performance of the robot will be
affected. Contact DJI if the antenna is damaged.

Camera

The camera features a 1/4-inch sensor with 5 million pixels and a FOV of 120°, allowing users to
control the robot from a first-person perspective.
Clean the lens regularly to avoid blurring or halos. Use a special lens cleaner to make sure that
there is no foreign matter on the lens after cleaning and that it does not damage the lens.
2
DO NOT expose the camera to liquids or immerse in water.
DO NOT store the camera in a humid place.
DO NOT touch the lens.
If the camera is wet, wipe it with a dry soft cloth.

Speaker

The speaker connects to the intelligent controller via a 2.5mm device with a power rating of 2 W.
Make sure the speaker is properly installed and does not obstruct other components'
movements.
24
©
2020 DJI All Rights Reserved.
3
1
1. Camera Lens
2. Microphone
3. Camera Port
Used to connect the camera to
the intelligent controller.