Wilfa ACTIVLIFE B2G-800S Operating Instructions Manual page 59

During blending, you can press any switch button to stop blending.
When blending finish, all the stage lights light on and the switch button
indication lights keep flashing.
Notice: Do not leave the appliance continuously operating for more than 1
mins. Before restarting, let it cool down for at least 2 mins.
5. Unplug from power supply socket. Turn the blending bottle anticlockwise
toward open lock pattern, then take out the blending bottle, place it on a
flat surface (Fig 7).
6. Hold the blade assembly and turn it anticlockwise to take it out from
blending bottle (Fig 8). If you are using blending bottle, pour out the
drink, or fasten the drinking lid to take it outside. To fasten the lid, turn it
clockwise; to take it out, turn it anticlockwise.
Tips: If the blade assembly is too tight to take out, you can wear a dish washing
hand gloves to open it. To use drinking lid, turn the drinking lid anticlockwise
to open it to drink. To close it, turn the drink lid clockwise. Tips: The blending
bottle with drinking lid can be used as a sport water bottle.
How to use blending jar
1. Put the main body on a flat surface.
2. Fasten the blade assembly on the open end of the blending jar (Fig 1). Line
up arrows on the blade assembly to the arrows on the base and place the
blending jar in the base. To lock the blending jar in the base, simply turn
the blending jar clockwise in the base (Fig 2). Add water or milk into the
blending jar (Fig 3).
Notice: Never add ingredient and liquid that pass the MAX marking on
blending jar.
Fig7
Fig8
11