Wilfa ACTIVLIFE B2G-800S Operating Instructions Manual page 54

6
• Do not put too much fruit into the blender. Never
put the fruit over MAX indication line on blending
bottle, or 800ml indication line on blending jar.
• Make sure there is a seal ring inside the blade
assembly to avoid leaking.
• Do not connect the power plug into power
supply socket before fully assemble.
• Make sure the blade assembly is firmly assembled
with blending bottle or blending jar to avoid
disassemble or leaking.
• Never put the assembled bottle or jug without
any content on the main body to avoid miss
switching on the appliance and result expose
blades are turning.
• Never put fruit or water which temperature is
over 60 ºC to avoid appliance damages.
• Do not start blending if the blending bottle is
empty.
• This appliance can only be used for fruit
blending, never blend sugarcane, soy bean,
coffee bean, cinnamon, nuts, meat etc.
• Never take out the blending bottle or blending
jar during blending to avoid accident.
• Do not cover or block the air outlet at the bottom
of main body to avoid overheat.
• Any time when stop blending, unplug from
power supply socket.
• Check if the voltage indicated on the appliance
corresponds to the local mains voltage before
you connect the appliance.