Ricoh Pro C9100 Series Technical Bulletin page 61

Model:
Vacuum Feed LCIT RT5100
IMPORTANT:
- Make sure the scale ends touch the bent portion of each side fence.
- See Fig. 4 below for the correct and incorrect measuring positions.
5. Compare span A to B, and then C to D.
Specification: Difference between top and bottom is 0-2.0 mm.
 If the difference for either is more than 2.0mm, go to Step 6.
 Otherwise, the procedure is finished.
6. Disassemble the tray as shown in Fig.5.
T B
echnical
Fig. 4
Fig. 5
ulletin
Date:
31-Oct-16
PAGE: 3/4
No.:
RD777012