Ricoh Pro C9100 Series Technical Bulletin page 26

Model:
Vacuum Feed LCIT
Procedure when the main power switch is OFF
1. With the paper feed belt unit [A] installed, check if there is a gap between the frames
at the location indicated with the red dotted circle.
If there is no gap, confirm that the two screws fixing paper feed belt unit are securely
fastened. This completes the procedure.
If there is a gap, do Steps 2 through 4.
T B
echnical ulletin
Date:
30-Nov-15
PAGE: 4/5
No.:
RD777005