Ricoh Pro C9100 Series Technical Bulletin page 56

Model:
Vacuum Feed LCIT RT5100
Subject:
Rework procedure: Side Fence Cleaning and Oil lubrication
From:
Field Quality Management Group 4, FQM Dept, QAC
Classification:
SYMPTOM
The side fence cannot slide smoothly.
CAUSE
Paper dust gets on the surface of the slide shaft and inside the bearings.
SOLUTION
Do the PROCEDURE below every 900K pages (PM cycle).
PROCEDURE
1. Clean the shaft of the side fence with a cloth as shown.
Important: If you cannot clean off all the dust and foreign material with the cloth, use a
vacuum cleaner.
T
echnical
Troubleshooting
Mechanical
Paper path
Product Safety
B
ulletin
Date:
31-Oct-16
Part information
Electrical
Transmit/receive
Other ( )
Fig. 1
PAGE: 1/3
No.:
RD777011
Prepared by: Takuya Hirakawa
Action required
Service manual revision
Retrofit information
Tier 2 Tier 0.5