Ricoh Pro C9100 Series Technical Bulletin page 20

Model:
Vacuum Feed LCIT
4. Insert the skew adjustment plates under the connection pins. Apply them on either the
operator side or the non-operator side depending on skew direction. Applying a plate
will correct 0.25mm/100mm of skew. Apply up to 4 pieces under a pin depending on
the skew amount measured in the previous step.
Apply them on either the operator side or the non-operator side depending on skew
direction.
T B
echnical ulletin
Date:
28-Oct-15
PAGE: 3/5
No.:
RD777004