Technical Details; Operation - Champion CHVK315 User Manual

Technical details

Model No.:
Mains Voltage:
Power consumption:
Capacity:
Parts
1. Spout
2. Base station
3. Lid handle
4. Handle
5. Water window with scales
6. On/Off switch with indicator light
7. Temperature window

Operation

Before use for the first time
1. Before first use, remove possible manufacturing process residues by boiling 3 full kettles of
water.
2. Dispose this water.
Tip: You can also use vinegar or special descaling agents.
Use
1. Turn the jug so that the spout faces away from you.
2. Pull up the lid handle (3).
3. Fill the jug with the required quantity of water (at least 0,5 liters and a maximum of 1,7
liters). Never fill the water boiler over the "Max". Otherwise the hot water can spatter out of
the base.
ATTENTION! Make sure that you do not spill any water on the base.
4. Pull up the lid handle to open the lid.
5. Place the jug on the base and insert the plug in the wall socket.
6. Push down the on/off switch. The on/off pilot light will illuminate.
7. The jug kettle is now switched on, and the water will now begin to heat. The jug kettle
switches off automatically a few seconds after the water has come to the boil. The on/off
pilot light will now extinguish.
8. Remove the jug from the base by the handle and pour the water out.
ATTENTION! Be careful you do not contact the hot water. It can cause serious burning wounds.
9. When you wish to heat the water without it coming to the boil you can switch off the jug
kettle at any time you require.
10. Remove the plug from the wall socket when you have finished using the jug kettle.
CHVK315 & CHVK320
220-240V ~ 50/60Hz
1850-2200W
1,7L
1
7
2
EN
4
3
5
6
2