Electrolux LKR620002W User Manual page 8

8 www.electrolux.com
Minimum distances
Dimension
A
B
C
3.2 Technical data
Voltage
Frequency
Appliance class
Dimension
Height
Width
Depth
3.3 Levelling of the appliance
Use small feet on the bottom of
appliance to set the appliance top
surface level with other surfaces.
B
A
mm
400
650
150
230 V
50 - 60 Hz
1
mm
858
600
600
3.4 Anti-tilt protection
Set the correct height and area for the
appliance before you attach the anti-tilt
protection.
C
You must install the anti-tilt protection. If
you do not install it, the appliance can tilt.
Your appliance has the symbol shown on
the picture (if applicable) to remind you
about the installation of the anti-tilt
protection.
1. Install the anti-tilt protection 232 -
237 mm down from the top surface of
the appliance and 110 - 115 mm from
the side of the appliance into the
circular hole on a bracket. Screw it
into the solid material or use
applicable reinforcement (wall).
CAUTION!
Make sure you install the
anti-tilt protection at the
correct height.
Make sure that the surface
behind the appliance is
smooth.