Fitting The Polishing Attachments - Parkside PDAP 75 A1 Translation Of The Original Instructions

Fitting the polishing attachments

CAUTION!
► Ensure that the appliance is disconnected from the
compressed air source before you fit or remove a polishing
attachment
♦ The polishing disc
, are equipped with matching Velcro attachments .
♦ Select the polishing hood
it onto the polishing disc
Ensure that it is centred .
♦ Now select the polishing hood
press it onto the polishing disc
Ensure that it is centred .
♦ For the final finish, select the fake fur attachment
onto the polishing disc
Ensure that it is centred .
♦ To change the attachment, lift one side of the polishing
attachment
■ 92 │ GB │ MT
, , .
and the supplied polishing attachments
(orange) for pre-polishing and press
.
.
, , and pull it off the polishing disc
(black) for final polishing and
.
,
and press it
.
PDAP 75 A1