Lubrication; Topping Up The Oil - Parkside PDAP 75 A1 Translation Of The Original Instructions

Lubrication

NOTE
► Regular lubrication is particularly important to avoid friction
and corrosion damage . We recommend using a suitable
special oil for compressed air appliances (e .g . Liqui Moly
compressor oil) .
–
Lubrication with mist oiler
A mist oiler (not supplied) continuously and optimally lubri-
cates the grinder as a preparation stage after the pressure
reducer . A mist oiler gives off fine drops of oil into the air
flow and thus guarantees a regular lubrication .
–
Manual lubrication
If you do not have a mist oiler, lubricate the appliance
before every use or longer work sessions . Add 3–5 drops of
pneumatic oil into the connector nipple

Topping up the oil

To ensure that the compressed air polisher remains operational for
as long as possible, make sure that there is sufficient pneumatic oil in
the appliance .
The following options are available
♦ Attach a maintenance unit with an oiler to the compressor .
♦ Install a fitted oiler into the compressed air line or the compressor .
♦ Add 3–5 drops of pneumatic oil into the connector nipple
every 15 minutes of operation .
PDAP 75 A1
.
GB │ MT │ 93 ■