Table of Contents
Advertisement
Available languages
Available languages
EN
BASIC SETTINGS
Adjusting the maximum speed for power assistance
1.
Start the system and then press the buttons
maximum speed for power assistance is shown flashing.
2.
Tap the button
is 25 km/h.
3.
Tap the button
Setting the wheel diameter
The wheel diameter should be set after setting the maximum speed. The wheel diameter value
flashes to indicate this.
1.
Tap the button
–
Diameter settings are 8 inch, 10 inch, 12 inch, 14 inch, 16 inch, 18 inch, 20 inch, 22 inch,
24 inch, 26 inch, 700c and 28 inch.
2.
Tap the button
Setting the measurement units
The measurement units should be set after setting the wheel diameter. The symbols km/h and km or
MPH and Mil flash to indicate this.
Display
Speed
Total distance
84
or
to set the maximum speed for power assistance. The standard setting
to go to the next setting.
or
to set the wheel diameter.
to go to the next setting.
Metric
km/h
km
and
at the same time for 5 seconds. The
Imperial
MPH
Miles
Advertisement
Table of Contents
