PROAIM P-OHCP-01 Assembly Manual

3ft overhead platform for camera & studio lights

3ft Overhead Platform for Camera & Studio Lights

(P-OHCP-01 )

A s s e m b l y M a n u a l

No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,

electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright

statutes or in writing by the Publisher.

Table of Contents

Need help?

Do you have a question about the P-OHCP-01 and is the answer not in the manual?

Page 1 3ft Overhead Platform for Camera & Studio Lights (P-OHCP-01 ) A s s e m b l y M a n u a l All rights reserved. No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means, electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright statutes or in writing by the Publisher.
Page 2 What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below. 2x foot joints...
Page 3 3ft Overhead Platform Setup  Mount the 2 foot joints on the Ground feet using M5 screws for each joint, do not over tighten the screws.  Attach the rubber feet on the ground feet using by thumb screws, tighten the screws with the provided allen key.
Page 4 2 clips. The backdrop & other Related Accessories is not included with the Overhead Camera Platform. YOUR PROAIM 3FT OVERHEAD PLATFORM FOR CAMERA ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts.