Brake Installation - Magura CLARA Manual

w w w . m a g u r a . c o m
s e r v i c e @ m a g u r a . d e

5. Brake Installation

2
1
11
10
1. Tools for installation (+maintenance)
Allen key 2*, (3) and 5
transport/mounting device*
sharp knife
8mm open end wrench
flat blade screw driver
Torx T25 key*
(Torx T7 key)
(*delivered with the brake)
Always insert the allen and torx keys completely to avoid damaging the
bolt heads.
3
6
9
8
5
7
12
13
4
1. brake lever (master cylinder) connected through the
2. brake hose with the
3. brake caliper with transport device (shown is International Standard version;
ATTENTION: remove
4. YELLOW transport device only shortly before installation of the wheel!)
5. rotor (diameter Clara: front and rear 160mm)
(diameter Julie: front 180mm, rear 160mm)
6. fitting bolts for caliper Allen key 5 (2 pieces)
7. fitting bolts for rotor Torx key T25 (6 pieces)
8. 0,2mm spacers (8 pieces)
9. black 1mm spacers (2 pieces, only necessary for Julie rear brakes)
10. hose inserts (2 pieces, only necessary for Clara)
11. olives (2 pieces)
12. Torx T25 key
13. Allen key 2
not shown: hose fitting kit for rear brake (comes with all rear brakes)
specifications modifying and improving this product are subject to
change without prior notice.
Unpack your Clara or Julie disc brake:
6