Advertisement
GBH-290 POWER RACK
OWNER'S MANUAL
Product may vary slightly from the item pictured due to model upgrades
Read all instructions carefully before using this product. Retain this owner's manual for
future reference.
NOTE: This manual may be subject to updates or changes. Up to date manuals are available through our website at www.lifespanfitness.com.au
Advertisement
Table of Contents
Related Manuals for LSG GBH-290
Summary of Contents for LSG GBH-290
- Page 1 GBH-290 POWER RACK OWNER’S MANUAL Product may vary slightly from the item pictured due to model upgrades Read all instructions carefully before using this product. Retain this owner’s manual for future reference. NOTE: This manual may be subject to updates or changes. Up to date manuals are available through our website at www.lifespanfitness.com.au...
-
Page 2: Table Of Contents
TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS CARE INSTRUCTIONS PARTS LIST ASSEMBLY INSTRUCTIONS WARRANTY... -
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS WARNING - Read all instructions before using this product. Please keep this manual with you at all times It is important to read this entire manual before assembling and using the equipment. Safe and effective use can only be achieved if the equipment is assembled, maintained and used properly. Please note: It is your responsibility to ensure that all users of the equipment are informed of all warnings and precautions. -
Page 4: Care Instructions
CARE INSTRUCTIONS Lubricate moving joints with silicon spray after periods of usage • Be careful not to damage plastic or metal parts of the machine with heavy or sharp objects • The machine can be kept clean by wiping it down using dry cloth •... -
Page 5: Parts List
PARTS LIST Picture QTY. Name Connecting link Floor rack 110mm Flat connecting sheet M10*70 Φ10 Main column frame Short connecting frame Front column frame Small support frame Grill pipe rack M10*20 Upper joint welding Welding of barbell shelf Bending shelf welding... -
Page 6: Assembly Instructions
ASSEMBLY INSTRUCTIONS NOTE: 1. Gaskets shall be placed at both ends of the bolt (against bolt head and nut), as otherwise stated. 2. The initial assembly is to tighten all bolts and nuts by hand, and to tighten them with wrenches when fully assembled. - Page 7 Step 2 1. Unscrew the nut on the pedestal (# 2), and then place the main column frame (# 7), the front column frame (# 9) and the small support frame (# 10) on the pedestal (# 2) as shown in the figure, and fasten them with a flat gasket (# 5) and a nut (# 6), respectively.
- Page 8 Step 3 1. According to the diagram, the upper connection welding (# 3) is placed between the two main column frames (# 7), and the two ends are fastened with 110mm flat connection plate (# 3), carriage bolt M10 x 70 (# 4), flat gasket (# 5) and nut (# 6) respectively. 2.
-
Page 9: Warranty
5. WARRANTY AUSTRALIAN CONSUMER LAW Many of our products come with a guarantee or warranty from the manufacturer. In addition, they come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage.
Need help?
Do you have a question about the GBH-290 and is the answer not in the manual?
Questions and answers