Table of Contents
Advertisement
(3) Set scan option by using ◀ ▶ keys. Select items in the list and press OK.
(4) PID data can be applied manually.
(5) Choose scan type (ALL or FTA) using ◀ ▶ keys. Then press OK to search in Scan Start.
2.4 Smart Search
Smart Scan enables to search and scan all channels in the satellite without any preprogrammed data.
Recommend to use this function once in a while or anytime TP & Channel data changed.
2.4.1 Satellite
1. Select a satellite by using ◀ ▶ keys.
2.4.2 LNB Configuration
Please refer to 2.1 Antenna Setup
2.4.3 Symbol range
• Full : High and Low
2.4.4 Polarity
• Select Horizontal / Vertical with ◀ ▶ keys.
• All :Horizontal and Vertical
• Horizontal : Scan Horizontal TP only.
• Vertical : Scan Vertical TP only.
2.4.5 Scan
• Select scan type with ◀ ▶ keys.
• When you select OK key, the scanning will start.
2.5 SAT & TP Edit
In this mode, you can add the new satellite and the new transponder information.
Also you can update or delete the transponder information.
ⓒ 2007 by Panarex Electronics
21
Advertisement
Table of Contents
