Table of Contents
Advertisement
2.5.1 How to add a new satellite
• Select "New" in the satellite name by using CH ▲▼ keys. Press VOL ▲▼ keys to input the name of satellite in
keyboard menu. Then press OK to save.
• If you want to add TP, please refer to 2.5.3 item.
2.5.2 How to rename a satellite
• Press OK after selecting a satellite of which you want to change name.
• Select "Rename" in the menu.
• Enter new name by using ▲▼ keys and press OK key.
2.5.3 How to Delete/Restore a satellite
• Press OK key after selecting a satellite you want to delete.
• Press OK to confirm, otherwise press EXIT to cancel. The color of the deleted satellite name in the list is changed.
• The satellite which has had already searched channels cannot be deleted.
• To restore the deleted satellite, move the cursor to the deleted satellite and press OK key. Then select "Restore" in
the screen and press OK key.
2.5.4 How to add a new transponder
• Press ▲▼ keys to move into TP list.
• Press ▲▼ keys to go NEW item.
• Press OK key selecting "NEW" in the transponder list
• Enter the Down frequency, Symbol Rate and LNB Polarity.
• Press EXIT or OK. Then new transponder information is stored.
2.5.5 How to delete or update a transponder added
• Press OK key after selecting a satellite
• Select Edit TP, then transponder list is shown
• Select a transponder you want to delete or update.
• Press OK on the TP you want to Edit or Delete.
• You can see the Edit or Delete in the small-menu.
• In case you want to edit a TP list,
Select EDIT and press OK key.
Enter Down frequency, LNB polarity and Symbol Rate and press EXIT or OK
Then New TP date is automatically updated.
• In case you want to delete a TP
Select Delete in the small menu, press OK key.
Then the selected TP is deleted.
ⓒ 2007 by Panarex Electronics
22
Advertisement
Table of Contents
