Declaration Of Conformity; Manufacturer's Warranty; Technical Specifications - STEINEL XLED home 2 Manual

7. Operation/maintenance
The LED floodlight is not suitable for burglar alarm
systems as it is not tamperproof in the manner pre-
scribed for such systems. Weather conditions may
affect the way the LED floodlight works. Strong
gusts of wind, snow, rain and hail may cause the
light to come ON when it is not wanted because
the sensor is unable to distinguish between sudden
changes in temperature and sources of heat.
The detector lens may be cleaned with a damp
cloth if it gets dirty (do not use cleaning agents).
8. Disposal
Electrical and electronic equipment, accessories
and packaging must be recycled in an environmen-
tally compatible manner.
Do not dispose of electrical and
electronic equipment as domestic
waste.
G B
EU countries only:
Under the current European Directive on Waste
1 3
Electrical and Electronic Equipment and its imple-
Y E A R Y E A R
mentation in national law, electrical and electronic
equipment no longer suitable for use must be MANUFACTURER'S MANUFACTURER'S
WARRANTY WARRANTY
collected separately and recycled in an environ-
mentally compatible manner.

9. Declaration of Conformity

STEINEL Vertrieb GmbH hereby declares that
the XLED home 2 Connect radio equipment type
conforms to Directive 2014/53/EU. The full wording
of the EU Declaration of Conformity is available for
downloading from the following Internet address:
www.steinel.de

10. Manufacturer's Warranty

This STEINEL product has been manufactured with
utmost care, tested for proper operation and safety
and then subjected to random sample inspection.
Steinel guarantees that it is in perfect condition
and proper working order. The warranty period is 5
years and starts on the date of sale to the consum-
er. We will remedy defects caused by material flaws
or manufacturing faults. The warranty will be met by
repair or replacement of defective parts at our own
discretion. The warranty shall not cover damage to
wear parts, damage or defects caused by improper
treatment or maintenance. Further consequential
damage to other objects shall be excluded. Claims
under the warranty will only be accepted if the unit
is sent fully assembled and well-packed with a brief
description of the fault, a receipt or invoice (date of
purchase and dealer's stamp) to the appropriate
Service Centre.
Service:
Our Customer Service Department will repair faults
not covered by warranty or after the warranty pe-
riod. Please send the product well-packed to your
nearest Service Centre.
5
Y E A R
MANUFACTURER'S
WARRANTY
– 20 –

11. Technical specifications

XLED Home 2 XLED Home 2 XL
Dimensions 218 × 180 × 161 240 × 180 × 161
(H × W × D)
Output/efficiency 14 W / 106 lm/W 20 W / 106 lm/W
Luminous flux / 1484 lm 2120 lm
brightness
Power 0.55 W 0.55 W
consumption
Weight 0.575 kg 0.620 kg
Area illuminated Front view Front view
283.1 cm 316.2 cm
2
Side view Side view
113 cm 115 cm
2
Mains current 79 mA 103 mA
Power factor 0.77 0.85
Additional swit- Incandescent / halogen lamp load
ching capacity Fluorescent-lamp electronic ballasts
Fluorescent lamps, uncorrected
XLED home 2 Fluorescent lamps, series-corrected
XLED home 2 XL Fluorescent lamps, parallel-corrected
Low-voltage halogen lamps
LED < 2 W
2 W < LED < 8 W
LED > 8 W
Capacitive load
Colour 3000 K (warm white)
temperature
Colour rendering
index
Supply voltage 220-240 ~V / 50/60 Hz
Sensor system Passive infrared
Reach
Angle of
coverage
Time setting 8 s - 35 min (XLED home 2 Connect 5 s -60 min)
Twilight setting
IP /
protection class
Bluetooth
frequency
Bluetooth trans-
mitter power
XLED Home 2 XLED Home 2 SL
Connect
218 × 180 × 161 181 × 180 × 161
13.5 W / 109 lm/W 13 W / 111 lm/W
1472 lm 1443 lm
0.35 W -
0.575 kg 0.480 kg
Front view Front view
283.1 cm 274.1 cm
2 2
Side view Side view
113 cm 86.3 cm
2 2
69 mA 66 mA
0.86 0.86
1000 W
430 W
500 VA
900 VA
500 VA
1000 VA
16 W
64 W
64 W
88 μF
Ra ≥ 80
max. 10 m
180°
2-2000 lux
IP44 / II
2.4-2.48 GHz
5 dBm/3 mW
– 21 –
GB
2
2