Cleaning And Maintenance - Haier HIH-V60HM-C Installation Manual/User Manual

We recommend following 'Cleaning and maintenance' instructions for safety and optimal
performance of your range hood.
Preparation for cleaning and maintenance
● Be sure to unplug the power cord before commencing cleaning or servicing of the range hood.
● Always wear rubber gloves during cleaning and maintenance to guard against injury from sharp
metal parts.
● Always handle removed parts carefully to avoid damaging them.
● Clean and service your range hood regularly, depending on the frequency of use.
Cleaning the main housing (daily)
● The outer surface of the range hood and filter should be wiped every day after use.
● To protect the stainless steel finish, use a neutral detergent and a soft cloth. Never use hard
brushes.
● Never wipe surfaces with corrosive chemicals such as gasoline or alcohol, or abrasivecleaning
agents.
Cleaning the oil collector (as necessary)
● When the oil collector is almost full,it should be removed promptly to avoid overflow.
● Pull the oil collector straight out to detach it from the filter.
● Empty the oil collector.
● The oil collector should be washed in warm water with detergent (do not use corrosive chemicals).
● To replace the oil collector, slide it into the slot and ensure it is pushed all the way in.
chimney
filter
oil collector

CLEANING AND MAINTENANCE

lower glass panel
11
control glass panel
Fig.9