Frico SCV21DCI Installation Manual page 7

Soloclim vertical
Table of Contents

Advertisement

Soloclim Vertical - Utilisation
EN
Key/Display
Operation
Setting power for models inverter 10HP and 12HP
By pressing this key sequentially, it is possible to set the power supplied by the appliance on 5
adjustments: Minimum, Medium, Maximum, Dual Power and Automatic.
The higher the power is set, the better the appliance will perform, but it will be less quiet.
The Dual Power function (shown by three flashing speed bars on the display and the seven red or blue
bars moving up and down of the digital thermometer), available only in heating and cooling mode,
supplies a 30-minute Overboost.
Then, the controller inhibits the function and switches to automatic mode.
By selecting Automatic mode (shown by three speed bars moving up and down on the display), the on-
board microprocessor automatically adjusts the speed, so that it stays higher the greater the difference
between the temperature detected and the temperature set. This is not possible in humidification only
or nocturnal well-being mode where the appliance can only operate at a low speed.
Setting the Timer function
The appliance allows the user to program when to turn it on and off, as required.
While the conditioner is running, it is possible to schedule when it turns off by pressing the Timer
button, followed by the number of hours (from 1 to 24), after which the unit will be put in stand-by.
When the air conditioning unit is off, it is possible to schedule when it turns on by pressing the Timer
button, followed by the number of hours (from 1 to 24) after which the unit will start.
Then, press the confirm button.
Touch-screen display key lock
The key lock is activated by keeping the Timer symbol on the touch-screen display pressed for three
seconds. The user cannot perform any actions. The stand-by symbol flashes every second.
To deactivate the lock, keep the Timer symbol on the touch screen pressed for three seconds once
again.
The lock remains active in the case of a power failure and also if the remote control is used!
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Scv23dci

Table of Contents