Table of Contents
Advertisement
U
I
S
It is possible to select the various modes by pressing the
buttons (see paragraph entitled Description of operations).
It is possible to select the various modes by pressing the
The remote control provided has been designed to
buttons (see paragraph entitled Description of operations).
be functional and hard-wearing, however, it must be
handled cautiously.
The remote control provided has been designed to
Avoid:
be functional and hard-wearing, however, it must be
-
leaving it exposed to rain, pouring liquids on it or
handled cautiously.
dropping it into water
-
hitting it or dropping it on hard surfaces
Avoid:
-
leaving it under the sun
-
leaving it exposed to rain, pouring liquids on it or
dropping it into water
Battery insertion
-
hitting it or dropping it on hard surfaces
-
leaving it under the sun
Only CR2012 3V dry lithium batteries must be used
(supplied). Used batteries must be handed over to
the specific collection areas as arranged by the Local
Authorities for this type of waste.
Battery insertion
In order to insert the batteries, open the specific cover
Only CR2012 3V dry lithium batteries must be used
1.3
Description of operations
(supplied). Used batteries must be handed over to
General start-up and management
the specific collection areas as arranged by the Local
In order to manage the appliance using the remote control
Authorities for this type of waste.
and the touch-screen, the main switch on the electrical
power supply line must be turned on (its exact position can
be indicated by the technician who installed the appliance)
or the power supply plug must be connected to the system
Description of operations
socket.
Once such operations have been performed, it is possible
General start-up and management
to manage the system by holding down the symbols on the
In order to manage the appliance using the remote control
and the touch-screen, the main switch on the electrical
Key/Display
Operation
power supply line must be turned on (its exact position can
The keys of the remote control and of the touch screen display perform the same functions.
be indicated by the technician who installed the appliance)
When the unit is turned on, the 3 digits on the display will show the set-point.
or the power supply plug must be connected to the system
socket.
Once such operations have been performed, it is possible
•
Key/Display
Operation
The keys of the remote control and of the touch screen display perform the same functions.
When the unit is turned on, the 3 digits on the display will show the set-point.
It is possible to set the set-point between 16 and 31°C, to which temperature the unit will bring the
room.
If the temperature is set too low or too high, not only it is unhealthy, but it is also an unnecessary
waste of energy.
Soloclim Vertical - Utilisation
It is possible to set the set-point between 16 and 31°C, to which temperature the unit will bring the room.
If the temperature is set too low or too high, not only it is unhealthy, but it is also an unnecessary
waste of energy.
-
placing obstacles between the remote and the
appliance while using it.
-
placing obstacles between the remote and the
In addition:
-
if there are other appliances using remote controls in
appliance while using it.
the room (TV, radios, stereos, etc.), interferences may
In addition:
occur
-
electronic or fluorescent lamps can interfere with
-
if there are other appliances using remote controls in
communication between the remote and the appliance
the room (TV, radios, stereos, etc.), interferences may
-
remove the battery if not using the remote for a long
occur
time.
-
electronic or fluorescent lamps can interfere with
communication between the remote and the appliance
-
remove the battery if not using the remote for a long
time.
in the bottom part of the remote. The battery must be
inserted respecting polarity. Once the battery is inserted,
close the cover.
In order to insert the batteries, open the specific cover
in the bottom part of the remote. The battery must be
inserted respecting polarity. Once the battery is inserted,
touch-screen (for 3 seconds) or by using the remote control.
close the cover.
In order to send commands to the internal unit, the top part
of the remote must point towards the display of the internal
unit. The reception of the command is confirmed by a beep
and by the display. The maximum distance for the remote
control to work is approximately 8 metres.
to manage the system by holding down the symbols on the
touch-screen (for 3 seconds) or by using the remote control.
In order to send commands to the internal unit, the top part
of the remote must point towards the display of the internal
unit. The reception of the command is confirmed by a beep
and by the display. The maximum distance for the remote
control to work is approximately 8 metres.
EN
USER MANUAL
EN
5
5
Advertisement
Table of Contents
