Quick Start Label Symbols - Champion 100416 Operator's Manual

100416 - 8000W TRi-FUEL PORTAbLE GENERATOR

Quick Start Label Symbols

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these
symbols will allow you to more safely operate the product.
1 2
10W-30
4 5
2-3X

Move generator outside and far away from windows,
doors and intake ventilation covers.
Starting the Engine - Gasoline
1. Check oil level. Add if needed. See "Add Engine Oil" section.
2. Check gasoline level. Add if needed. See "Add Fuel –
Gasoline" section.
3. Turn EZ Start dial to GASOLINE CHOKE position.
4. Pull recoil cord handle.
5. Turn EZ Start dial to GASOLINE RUN position.
6. Plug in desired devices.
See "Starting the Engine – Gasoline" for details.
Starting the Engine – Propane (LPG)
1. Check oil level. Add if needed. See "Add Engine Oil" section.
2. Connect propane tank to generator.
3. Turn side panel LPG-NG selector to PROPANE position.
4. Turn EZ Start dial to LPG/NG CHOKE position.
5. Pull recoil cord handle 2 to 3 times.
6. Turn EZ Start dial to LPG/NG RUN position.
7. Pull the recoil cord.
8. Plug in desired devices.
See "Starting the Engine – Propane (LPG)" for details.
Starting the Engine – Natural Gas (NG)
1. Check oil level. Add if needed. See "Add Engine Oil" section.
2. Connect natural gas hose to generator.
3. Turn side panel LPG-NG selector to NATURAL GAS position.
4. Turn EZ Start dial to LPG/NG CHOKE position.
5. Pull recoil cord handle 2 to 3 times.
6. Turn EZ Start dial to LPG/NG RUN position.
7. Pull the recoil cord.
8. Plug in desired devices.
See "Starting the Engine – Natural Gas (NG)" for details.
3 1 2
+
10W-30
6 5 6
2-3X
DANGER
3 4 1
10W-30
8
7 5
2-3X
LPN 2096-L-OP Colors Colors
Stopping the Engine – All fuels
Rev A
300 7621 354 186 376 152 2945 K
Size 500 x 35 mm
Artwork Notes Revision Changes
3mm corner radius; 2mm safe margin; to be printed ---
1. Turn off and unplug all connected electrical loads.
on white substrate.
This artwork belongs to Champion Power Equipment. The contents are confidential and privileged and shall not be disclosed to or used by or for
outside parties without the explicit consent of Champion Power Equipment.
2. Turn EZ Start dial to ENGINE STOP position.
3. If operating on LPG, turn OFF fuel valve on cylinder.
4. If operating on NG, turn OFF NG supply valve.
For Electrical Start, see "Starting the Engine" section in the
Operations section.
11
iMPORTANT SAFETY iNSTRUCTiONS
2 3 4
8
6 7
1 2
3 4