Technical Information; Performance Specifications; Reservoir Fluids - PolyScience LX Immersion Circulator Operator's Manual

Technical Infor mation
Per for mance Specif ications
Operating Temperature Range:
Temperature Stability:
Heater Wattage:
Electrical Requirements:
Environmental Conditions
Specifications subject to change without notice.
Attainable Temperatures:
Your LX Immersion Circulator can be used with reservoirs of
various capacities and shapes as well as different fluids. These
variables may adversely affect temperature accuracy and
stability.
Reser voir Fluids
A variety of fluids can be used with your Immersion Circulator.
The bath fluid must be chemically compatible with the reservoir
and the materials in your Immersion Circulator, and must be
suitable for the desired temperature range.
!
!
110-874
WARNING: Do not use a flammable liquid as a bath
fluid as a fire hazard may result.
WARNING: Always use fluids that satisfy safety,
health and equipment compatibility requirements.
Ambient +10° to 98°C
Ambient +20° to 208°F
±0.07°C / ±0.1°F
1200 watts
120V, 60Hz, 10 amps or
240V, 50Hz, 6 amps
Indoor use only
Maximum Altitude:
Operating Ambient:
Relative Humidity:
Installation Category:
Pollution Degree:
Ingress Protection:
Output Waveform:
2000 meters
5° to 40°C (41° to 104°F)
85%, non-condensing
II
2
IP X0
Sinusoidal
19