Unpacking Your Immersion Circulator; Package Contents - PolyScience LX Immersion Circulator Operator's Manual

This product has been tested to the requirements of CAN/
CSA-C22.2 No. 61010-1, second edition, including Amendment
1, or a later version of the same standard incorporating the same
level of testing requirements.
The user shall be made aware that the protection provided by
the equipment may be impaired if the equipment is used with
accessories not provided or recommended by the manufacturer,
or used in a manner not specified by the manufacturer.

Unpacking Your Immersion Circulator

Your Immersion Circulator is packed in a special carton. You
should keep this carton, along with all packing materials, until the
unit has been installed and you are certain it is working properly.
!
We recommend that you begin using your Immersion Circulator
immediately to confirm proper operation.
In the unlikely event that the unit was damaged or does not
operate properly, immediately contact the company where your
Immersion Circulator was purchased.
Package Content s
• LX Immersion Circulator
• Quick-Start Guide
• Operator's Manual
• Selection Guide
6
CAUTION: Remove any loose packing material that
may have fallen into the heater/pump housing during
shipping. Before powering up, check that nothing
remains around the heater or circulator pump.
110-874